Multi Füller Universal filler

6,00 € – 15,00 €

Weight	Clear

Description

Filling polyester putty

Colour: yellow

Gloss grade: matt

Filling polyester putty dedicated to car body repairs. Universal use product allows to get very good quality of filling providing high level of hardness and flexibility. Easy to work and sand.

Advantages

Very good adhesion to metals.
Easy to mix and apply.
Good sanding quality.

Substrates
The product has very good adhesion to various substrates. It can be applied over.

Steel and aluminum after flatting and degreasing.
Zinc coated steel after flatting and degreasing.
Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.
We recommend sandpaper with gradations: P80÷P120.

Caution: Do not apply the putty directly on wash primers, 1K acrylic and nitrocellulose products.

Use

Filling polyester putty for car body repairs.

Mixing ratio by weight

Putty: 100

Hardener: 2

Stir thoroughly until achieving homogenous paste to not create air inclusions.

Layer thickness

Putty can be applied in several thin coats. After each of them the product should dry through. Sand the coating before application of next coat.

Pot life is 4 ÷ 6 minutes at 20°C

Hardening time

20 ÷ 30 minutes at 20°C.

Temperature below 20°C significantly increases the hardening time.

Sanding

Coarse sanding (dry): P80 ÷ P120,

Finishing sanding (dry): P120 ÷ P320.

IR Drying

5 ÷ 7 minutes of short waves, depending on the layer thickness and the type of radiator. Do not exceed the temperature of 60°C.

Use as recommended by the equipment manufacturer.

Wait about 5 min before the IR drying process.

Informacja

Further work

Polyester putties can be over coated with:

2K polyester putties.
2K polyester spray fillers.
2K acrylic fillers.
2K epoxy fillers.

General notes

Excessive amount of hardener will cause problems with bleaching of the top coat!
Use personal protection equipment during the 2K products application. Protect eyes and respiratory system.
Use personal protection equipment during the 2K products application.
Protect eyes and respiratory system.

Caution: To maintain safety, always follow the instructions given in the MSDS for the products.